Siding contractor · Chilliwack, BC
Siding that stands up to Fraser Valley weather
Book a free estimate for new siding or a full replacement on your home or commercial building.
New siding, done properly underneath
Good siding is more than what you see. We look after the wall behind it so water stays out and the finish lasts.
- Siding replacement and new installs
- Metal and aluminum siding, including flush panel
- Soffit, fascia and trim
- Residential and commercial buildings
Siding types we install
Pick the look, we'll build it right
Not sure which style suits your home? We'll walk you through the options at your free estimate.

Hardie lap
James Hardie fibre cement lap siding. Tough, fire resistant and built for wet West Coast weather.

Board and batten
Wide vertical boards with narrow battens over the joints. Great on full walls or as a gable accent.

Flush panel / reveal
Smooth panels set with crisp reveal joints for a modern finish on homes and commercial buildings.

Shakes
Shingle-style siding with a textured, staggered pattern. A natural fit for gables and craftsman homes.

Vinyl siding
Low-maintenance vinyl in a wide range of colours and profiles. An affordable refresh that never needs painting.

Metal siding
Steel and aluminum panels, including standing seam and flush profiles. Long-lasting, non-combustible and low-maintenance, with a sharp modern look for homes and commercial buildings.
Siding guide
Choosing siding for a Fraser Valley home
Long, wet winters and summer heat are hard on a wall. Here is how the main options compare, so you can walk into your estimate knowing what to ask.
| Hardie fibre cement | Vinyl | Metal / flush panel | |
|---|---|---|---|
| Moisture | Won't rot, swell or feed mould when installed with sealed cut edges and proper clearances | Won't rot or absorb water; water that gets behind it drains through its hollow profile | Won't rot; relies on well-detailed flashing and joints |
| Impact & wind | Heavy and rigid, holds up well to hail and wind | Can crack on hard impacts in cold weather, and can warp near BBQs or reflected sun | Very tough; can dent on a hard hit |
| Fire | Non-combustible, a strong choice near trees and neighbours | Melts and burns | Non-combustible |
| Upkeep | Factory or field paint needs a repaint over the years | Never needs painting; wash it down | Very low; factory finish |
| Look | Lap, board and batten, panels and shakes; crisp painted finish | Wide range of colours and profiles | Clean modern lines; homes and commercial |
| Budget | Mid to upper | Most affordable | Upper |
Built to code underneath
Rainscreen walls, to current BC Building Code
In coastal and Fraser Valley climates, the BC Building Code calls for a capillary break, known as a rainscreen, behind the cladding: a drained and vented air space of at least 10 mm, made with strapping or a drainage mat, so any water that gets past the siding can drain and the wall can dry out. We build every re-side to current BC Building Code rainscreen standards, with proper flashing at windows, doors and the base of the wall.
- Sheathing membrane and taped seams
- Strapping or drainage mat for a drained air gap
- Bug screen at the top and bottom of the cavity
- Window, door and through-wall flashing
- Rot and sheathing repairs before we close up
What's included
The work, start to finish
Assessment
We check the existing walls, flashing and trim so the quote covers what the job really needs.
Building envelope
Rotted sheathing and failed weather barrier are repaired before new siding goes on, and we build a drained rainscreen behind the cladding to current BC Building Code standards.
Installation
Our crew installs the siding, trim and finishing details, then cleans up the site.
How it works
From first call to final walkthrough
Request
Send the form or call the office. Tell us what you have in mind.
Site visit
An estimator comes out, looks at the job and takes measurements.
Written quote
You get a clear scope and price before any work is booked.
Build
Our crew does the work and walks it with you when it's done.
Siding FAQ
Questions Fraser Valley homeowners ask us
How do Hardie fibre cement and vinyl siding compare in wet Fraser Valley winters?
Both handle rain well when they are installed over a proper rainscreen. Hardie fibre cement is heavier and more rigid, so it resists wind, hail and impacts, it is non-combustible, and it will not rot or feed mould. It does need repainting over its life. Vinyl never needs paint and is the most affordable option, and its hollow profile lets water drain away, but it can crack from hard impacts in cold weather and can warp near heat sources like BBQs. For most homes we recommend Hardie for durability and resale value, and vinyl when budget is the priority. We will show you both at your free estimate.
Do you repair rotted sheathing and rainscreen or building envelope issues during a re-side?
Yes. Once the old siding is off, we inspect the sheathing and framing, cut out and replace any rot, and fix failed weather barrier and flashing before anything new goes on. We then build a rainscreen to current BC Building Code standards so the wall can drain and dry. If we find hidden damage, we show you photos and give you the cost in writing before we do the extra work.
How long does a typical residential siding replacement take?
It depends on the size of the house, the siding you choose and how much repair the walls need underneath. Most homes take a few weeks, and larger homes or jobs with a lot of envelope repair can take over a month. Your written quote includes an expected schedule, and we keep you updated if weather moves things around.
Do you handle strata, townhome and commercial exterior re-clads?
Yes. We re-side and re-clad strata buildings, townhome complexes and commercial buildings, like our four-storey metal re-clad on Mary Street in Chilliwack. We plan the work around residents and the public, keep the site safe and tidy, and give strata councils and property managers clear scopes and updates.
Do you build to BC Building Code rainscreen standards?
Yes. In coastal and Fraser Valley climates the BC Building Code calls for a capillary break, or rainscreen, behind the cladding: a drained and vented air space of at least 10 mm. We build every re-side to current code using strapping or a drainage mat, sheathing membrane, bug screen and proper flashing, so moisture is not trapped in your walls.